- Diecast Aluminum Alloy Heat Sink
- Efficient Polycarbonate (PC) Lens
- Plug 'n' play, easy to install
- High Intensity LEDs
- ECE R112/R7, DOT, SAE, CE, RoHS
2007-2016 Cruisers With Bullet Style Headlight
High Beam: 60W, Low Beam: 25W
Operating Voltage: 9-32V DC
Weatherproof Rating: IP 67
Color Temperature: 6000K
Color: Chrome, Black
Material: Diecast aluminum housing
Lens Material: PC
Lumens: 3450LM (High beam), 2800LM (Low beam)
Lifetime: Over 30,000 hours
Premium, high-intensity LED chips
Projects a brighter, more evenly spread light beam
Better illumination of the road, traffic and obstacles a rider should be aware of.
Makes the bike better visible to other motorists and pedestrians.
The headlight operates efficiently, requiring no greater amperage draw than a stock headlight.
1x 60W Victory LED Headlight with Halo Rings
Jason, your post was very helpful with the mystery of the dangling black & white wires and saved me a call to tech support, ty. (my light came with NO instructions)
My experience on a 2015 Victory Cross Roads 8-Ball is a bit different but still very happy with the product.
To get my halo ring to work, I had to connect the WHITE wire (+) to the positive wire on the bike connector of the LOW BEAM (connected to the left side of housing looking at the back of the headlight) in order for it to work at all. The halo would not work connected to the HIGH BEAM (connected to the right side of housing looking at the back of the headlight)
The halo is on all the time whether the LOW or HIGH BEAMs are on (the halo LEDs pull such low amperage that I dont think this matters - LFM Tech Support? you concur?)
The headlight is well made, rock solid, and puts out an amazing amount of light.
Considering what I have paid for LED lighting on this and my other motorcycles, this headlight is a GREAT buy!!!
I highly recommend it
This headlight, for the cost and in comparison to other models, it's fantastic! I love the halo running light. Nice broad, very bright spectrum of light. I purchased the black which looks amazing on my bike. TECHNICAL NOTE: Instructions do not explain how to operate halo light. It took several emails and phone calls to tech support to figure this one out. There are two wires (black and white) coming out of the back-right wiring harness. The white wire MUST be inserted into the positive terminal of the plug, when connecting to the bike. This allows the halo light to run at the same time at the day-running light. When you turn brights on, the halo light goes off. If you plug the white wire into the positive terminal on the left wiring harness (left runs the day running light. right harness runs the high beam), then ONLY the halo light comes on. The day-running light will not operate if setup this way. So it's important to plug the white wire into the positive terminal of the right wiring harness when connecting to the bike. Hope this helps. If I could add photos I would, but there's no option to add any.
If you're looking for a super cool, good looking headlight, that's very bright and provides a ton of light for a fraction of the cost, do yourself a favor and get this light!
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.