1. Will these lights fit my Jeep?
This kit is designed for the following USA-spec vehicles equipped with factory halogen fender lights:
2018–2026 Jeep Wrangler JL/JLU
2020–2026 Jeep Gladiator JT
Fitment may vary by trim and factory lighting configuration. Sport models require additional fitment confirmation. Please compare your original light housing and connector with the product images before ordering.
2. Will this kit fit Jeeps with factory LED fender lights?
This version is designed primarily for Jeeps equipped with factory halogen fender lights. Vehicles with factory LED lights may use different connectors, wiring or computer settings.
Do not order based on the model year alone. Please contact us with your vehicle year, model, trim and a photo of the factory connector if you are unsure.
3. What lighting functions does the kit provide?
The front turn signal assemblies provide:
White daytime running lights
White parking lights
Amber sequential turn signals
The side marker lights provide:
Amber side marker lighting
Amber turn signal lighting
The kit upgrades both the front and side lighting on the left and right fenders.
4. How does the sequential turn signal work?
When the turn signal is activated, the amber LEDs illuminate in a smooth flowing sequence instead of flashing all at once.
This creates a more modern appearance while making the turn indication easier for surrounding drivers to notice.
5. Does the smoked lens reduce visibility?
The smoked lens creates a darker, blacked-out appearance when the lights are turned off. When illuminated, the internal LEDs remain clearly visible through the lens.
Actual visibility may vary depending on daylight, weather and viewing angle. Always follow local vehicle-lighting regulations.
6. Are these lights plug-and-play?
For the listed factory halogen configurations, the lights use factory-style 6-pin connectors and are designed as direct replacements. No wire cutting is normally required.
Installation typically involves removing the original fender lights, connecting the new assemblies and testing every lighting function before reinstalling the trim.
7. Will I need resistors, coding or a flash scan?
Additional resistors or computer programming are not normally expected when the kit is installed on a matching factory halogen configuration.
However, Jeep wiring and computer settings can vary by trim, factory option and previous modification. If you experience hyper-flashing, warning messages or an incorrect lighting sequence, contact us before adding resistors or changing the vehicle settings.
8. How long does installation take?
A typical installation takes approximately 30–60 minutes with basic hand tools.
Installation time may vary depending on experience, trim configuration and whether the vehicle has aftermarket fenders or modified wiring.
9. What is included in the package?
The package includes:
2 sequential LED front turn signal lights
2 smoked LED fender side marker lights
The kit includes the lighting assemblies for both the driver and passenger sides.
10. Are the lights waterproof?
The assemblies are rated IP68 and use impact-resistant ABS housings with polycarbonate lenses. They are designed to withstand rain, dust, mud and normal off-road driving conditions.
Avoid spraying a pressure washer directly at the light seals or electrical connectors from close range.
11. What should I do if moisture appears inside the lens?
A small amount of temporary condensation may occur after major temperature changes and should normally disappear as the light warms and ventilates.
Persistent water droplets, standing water or condensation that does not clear may indicate a sealing issue. Stop using the affected light and contact customer support with photos or a video.
12. What warranty is included?
This product includes a 2-year warranty covering eligible manufacturing defects and lighting-function failures.
If you experience dead LEDs, sequential signal failure or a sealing issue during the warranty period, contact customer support with your order information and clear photos or video of the problem.
