
MAKE ROOM FOR THE WEEKEND
Sleep closer to the wild.
Turn your 4Runner into a welcoming place to wind down. From the last mile of the trail to the first coffee of the morning, bring a little more comfort along for the ride.

A SOFTER LANDING
10 inches of trail-day comfort.
Give your sleep setup some distance from the hard cargo floor. A 10-inch profile creates an inviting base for your sleeping bag or favorite blanket.
Support across the surface.
Honeycomb construction helps distribute support beneath you.
A built-in place to rest.
An integrated pillow adds a raised headrest.
Make yourself comfortable.
Add or release air to adjust firmness.

COMFORT YOU CAN FEEL
Soft to the touch. Ready for slow mornings.
A soft flocked top brings a skin-friendly feel to your sleep setup, with a PVC structure underneath. A quiet moment, a favorite blanket, and a little more time to ease into the day.

LESS SETUP. MORE SUNSET.
Ready to rest in about 2 minutes.
The built-in 12V electric pump handles inflation and deflation in about two minutes each. Turn the control to the mode you need, then settle in or pack up.
- Fold the rear seats and clear the cargo area.
- Connect to a compatible 12V vehicle outlet, select INFLATE and follow the supplied instructions.
- After inflation, switch the pump OFF and secure the valve caps.

ON TO THE NEXT STOP
Pack down. Head out.
When morning calls, deflate the mattress and stow it in the included storage bag. Your cargo space is ready for the next leg of the trip.
YOUR SETUP, UNPACKED
What comes with your mattress.
One mattress with a built-in 12V pump, plus instructions and a carry bag. Ready for the space between one adventure and the next.

MEASURE ONCE. GET COMFORTABLE.
The details, at a glance.
| Length | 65 in / 165 cm |
|---|---|
| Maximum width | 52 in / 132 cm |
| Width at pump end | 45 in / 114 cm |
| Inflated thickness | 10 in / 25.4 cm |
| Item weight | Approx. 8.9 lb / 4.0 kg |
| Material | PVC with a flocked sleeping surface |
| Support | Honeycomb structure; integrated raised pillow |
| Maximum total load | 600 lb / 272 kg |
| Pump | Built-in 12V electric pump |
| Inflation / deflation | About 2 minutes each |
| Storage | Deflates and folds into the included carry bag |
Dimensions are approximate. Compare both widths and the length with your available cargo space before ordering.
GOOD TO KNOW
A few answers before you head out.
Will it fit my 4Runner?
Check your year, trim and cargo layout with our team before ordering, especially with third-row seats or storage modifications. Measure your usable cargo space and compare the sleeping length with your height.
What should I do before the first trip?
Inflate it 24 hours before first use to let the material settle, then adjust firmness. Initial stretching can feel like air loss.
Why does it feel softer overnight?
Cooling air contracts and can reduce firmness. Top up as needed; persistent pressure loss should still be checked.
It loses air, but I cannot find a hole. What should I check?
Switch the pump off after inflation. Check that both layers of the separate air-valve cap are fully closed. Contact us if air loss continues.
Does the pump need vehicle power?
Yes. This version uses a built-in 12V electric pump. Connect it to a compatible vehicle outlet and follow the supplied instructions.
How do I switch between inflation and deflation?
Turn the pump control to INFLATE or DEFLATE as needed. Allow about two minutes for either operation, then switch it OFF. Refer to the supplied manual for the operating sequence.
How do I pack it away?
Deflate fully, fold the mattress and place it in the included carry bag.
What comes in the box?
One air mattress with a built-in 12V electric pump, an instruction manual and a carry bag.
