2'' Front LED Turn Signal & Running Light and Rear LED Brake Light With Dual Contact 1157 Base + Bracket Combo

𝐅𝐫𝐨𝐧𝐭 𝐋𝐄𝐃 𝐓𝐮𝐫𝐧 𝐒𝐢𝐠𝐧𝐚𝐥 𝐋𝐢𝐠𝐡𝐭 𝐑𝐮𝐧𝐧𝐢𝐧𝐠 𝐋𝐢𝐠𝐡𝐭 𝐰𝐢𝐭𝐡 𝐖𝐡𝐢𝐭𝐞/𝐀𝐦𝐛𝐞𝐫:

𝐓𝐮𝐫𝐧 𝐒𝐢𝐠𝐧𝐚𝐥 𝐋𝐢𝐠𝐡𝐭 - 𝐀𝐦𝐛𝐞𝐫
*The inner 27 LEDs are amber that function as the turn signal light.
*Amber-Out-Amber-Out blinking is very obvious, which can effectively attract the attention of the surrounding vehicles and pedestrians.

𝐑𝐮𝐧𝐧𝐢𝐧𝐠 𝐋𝐢𝐠𝐡𝐭 - 𝐖𝐡𝐢𝐭𝐞 𝐇𝐚𝐥𝐨 𝐑𝐢𝐧𝐠
*The outer halo ring with 21 LEDs is pure bright white while in the state of running light.
*A white halo ring adds a feature to the LED headlight and increases running light visibility at night which ensures driving safety

𝐏𝐥𝐮𝐠 𝐍 𝐏𝐥𝐚𝐲-𝟏𝟏𝟓𝟕 𝐃𝐮𝐚𝐥 𝐂𝐨𝐧𝐭𝐚𝐜𝐭
*No tools are required. Only 10 minutes are required to install.
*Our 1157 dual contact bulb bases model is your best choice if your bike models do NOT have a center taillight.

𝐑𝐞𝐚𝐫 𝐋𝐄𝐃 𝐓𝐮𝐫𝐧 𝐒𝐢𝐠𝐧𝐚𝐥 𝐋𝐢𝐠𝐡𝐭 𝐁𝐫𝐚𝐤𝐞 𝐋𝐢𝐠𝐡𝐭 𝐰𝐢𝐭𝐡 𝐑𝐞𝐝:

𝐓𝐮𝐫𝐧 𝐒𝐢𝐠𝐧𝐚𝐥 𝐋𝐢𝐠𝐡𝐭 - 𝐒𝐮𝐩𝐞𝐫 𝐁𝐫𝐢𝐠𝐡𝐭 𝐑𝐞𝐝
*The turn signal light and brake light are super bright red using all 48 LEDs.

𝐁𝐫𝐚𝐤𝐞 𝐋𝐢𝐠𝐡𝐭 - 𝐁𝐫𝐢𝐠𝐡𝐭 𝐑𝐞𝐝
*Each light uses 48 super-bright LEDs to light up the road behind you. It has all of the functions of the stock light including the brake light, turn signal, and running light.
*The turn signal and brake light flash super bright red by using all 48 LEDs to keep safe on the road. They are highly visible and noticeable.

𝐁𝐫𝐢𝐠𝐡𝐭𝐞𝐫 𝐋𝐄𝐃
*LED turn signals with 48 super-bright LEDs are brighter, safer, and more durable than other lights.
*Using more powerful LEDs to form a rear-facing LED cluster, it lights up the road behind you in a way that every driver will notice. The heat-sink design allows it to use higher output LEDs for the brightest light possible.

𝑵𝒐𝒕𝒆:
Bulb-out or hyper-flash of the turn signals may happen on some vehicles, the turn signal flash rate can be corrected by installing a Load Equalizer. If you need it after installation, please purchase via here>>SP-JK373

These turn signals are for 2 inch dual contact bullet-style turn signals, which will fit other makes that use 2" turn signals with 1157 bases. Older models may experience hyper flash which can be corrected by installing load resistors.

𝐍𝐨𝐭𝐞:International Harley Models: Front turn signals will not fit International Harley Models. Please check your original bulbs prior to purchase.

𝐇𝐚𝐫𝐥𝐞𝐲 𝐃𝐚𝐯𝐢𝐝𝐬𝐨𝐧 𝐦𝐨𝐝𝐞𝐥𝐬 𝐭𝐡𝐚𝐭 𝐭𝐡𝐞 𝐑𝐨𝐚𝐝 𝐄𝐪𝐮𝐚𝐥𝐢𝐳𝐞𝐫 𝐟𝐢𝐭 𝐚𝐫𝐞 𝐥𝐢𝐬𝐭𝐞𝐝 𝐛𝐞𝐥𝐨𝐰.

𝐒𝐭𝐚𝐧𝐝𝐚𝐫𝐝 𝐑𝐨𝐚𝐝 𝐄𝐪𝐮𝐚𝐥𝐢𝐳𝐞𝐫 𝐅𝐢𝐭𝐦𝐞𝐧𝐭:
*‘96 - ‘10 Softails
*‘97 - ‘11 Dynas
*‘99 - ‘03 Sportsters
*‘06 - ‘09 Street Glide
*‘97 - ‘13 Touring Models (Electra Glide, Ultra Classic, Ultra Limited, Road King models)
*‘97 - ‘09 Road Glide Models
*‘10 - ‘13 Tri-Glide

𝐒𝐩𝐨𝐫𝐭𝐬𝐭𝐞𝐫 𝐑𝐨𝐚𝐝 𝐄𝐪𝐮𝐚𝐥𝐢𝐳𝐞𝐫 𝐅𝐢𝐭𝐦𝐞𝐧𝐭:
*2004-2013 Sportster XL Models

𝐒𝐭𝐫𝐞𝐞𝐭 𝐆𝐥𝐢𝐝𝐞 / 𝐑𝐨𝐚𝐝 𝐆𝐥𝐢𝐝𝐞 𝐑𝐨𝐚𝐝 𝐄𝐪𝐮𝐚𝐥𝐢𝐳𝐞𝐫 𝐅𝐢𝐭𝐦𝐞𝐧𝐭:
*2010-2013 Street Glide and Road Glide models

*2 Pcs Front LED Turn Signal Lights with 1157 Dual Contact Base
*2 Pcs Rear LED Turn Signal Lights with 1157 Dual Contact Base
*4 Pcs Mounting Bracket