WHITE DAYTIME RUNNING LIGHT
A continuous visual signature.
The white DRL traces the perimeter of the headlight, creating a unified look across the front of your Grand Cherokee.
2014–2022 Jeep Grand Cherokee WK2 LED Headlights with Sequential Turns & Startup Animation — Pair
SP-LFMVL0605
Precio habitual
$394.99
Precio de oferta
$394.99
Precio habitual
Precio unitario
por
No se pudo cargar la disponibilidad de retiro
LED FACTORY MARTGRAND CHEROKEE · WK2
2014–2022 GRAND CHEROKEE LED HEADLIGHTS
A familiar Jeep.
A sharper signature.
A complete LED headlight upgrade for your WK2. A sculpted white outline, projector road lighting and a distinctive welcome every time you start.
Check your WK2 fitmentSold as a left & right pair. For the facelift WK2 body, including the 2022 Grand Cherokee WK.
- Complete LED
- High & low beam
- White DRL
- A defined daytime outline
- Amber signal
- Selectable sequential effect
- IP67 rated
- Water & dust protection
THE COMPLETE FRONT-END REFRESH
More than
a bulb change.
These Jeep Grand Cherokee headlight assemblies replace the complete lamp. The projector, light guide and turn signal are designed together behind one clear lens.
Defined when off. Distinctive when on.
A black interior gives the front end a clean, coordinated look. The illuminated outline follows the shape of the WK2 lamp.
Everything in one LED assembly.
Integrated LEDs handle the headlight and signature functions. There are no separate headlight bulbs to choose or purchase for the upgrade.
BUILT AROUND THE DRIVE
One projector.
Two essential beams.
LED high and low beam in each headlight assembly, with a cool white appearance for a cohesive nighttime setup.
LOW BEAM
For everyday night driving.
The LED projector supplies your normal low-beam function. Set the beam aim after fitting to suit your vehicle and driving position.
HIGH BEAM
For open, unlit stretches.
The same dual-beam projector provides high beam when additional forward illumination is appropriate.
6500–7000KListed LED color temperature
A SIGNATURE WITH PURPOSE
White through the day.
Amber at the turn.
Two distinct functions, integrated into a single design. A clean daytime outline and a dedicated amber signal.
AMBER TURN SIGNAL
Movement with a clear purpose.
Sequential amber indication adds a sweeping turn signal. The sequential function can be enabled or disabled through its designated connection.
FOLLOW THE SIGNAL
A sweep you can see.
The amber LEDs illuminate in sequence across the signal area. The stage diagram explains the motion; the product video below shows it in operation.
The designated function connection lets you select sequential behavior. Follow the guide supplied with your wiring version.
Function close-ups show the clear side-marker version. The main pair and bench images show amber side markers. Match the finish to the option selected above.
THE FIRST MOMENT
A welcome
with character.
The startup animation brings the light signature to life in sequence. Choose the animated welcome or disable it, with an optional blue startup effect controlled separately.
- Startup animationSelectable on / off behavior
- Optional blue startupSeparate from the white running light
- Sequential indicationIts own function connection
Use the supplied instructions for setup. The blue effect is a defined function, with no RGB color-wheel or app control. Check local permitted lighting colors before road use.
SEE THE FUNCTIONS
Watch the sequence unfold.
Startup, daytime signature and turn indication in a short product demonstration.
Video could not start. Please retry using the video controls.
A CLOSER LOOK AT THE PAIR
The real lights.
In motion.
See the matching assemblies powered on together. The bench footage shows the white light guide, blue startup effect and amber turn functions on the actual pair.
Video could not start. Please retry using the video controls.
BUILT FOR EVERYDAY EXPOSURE
Rain happens.
So does road dust.
Sealed lamp construction helps protect the components behind the lens from water and dust during everyday use.
- Polycarbonate outer lensA clear protective surface over the lighting assembly.
- Enclosed housingDesigned to resist dust and water ingress.
- Shock-resistant constructionBuilt for use on a moving vehicle.
The rating applies to the lamp assembly. Secure and protect every electrical connection during installation. This is not a claim of improved visibility through fog or unlimited water exposure.
THE DETAILS BEHIND THE LAMP
Connect with care.
Aim with precision.
Vehicle-style connections and supplied adapters support the upgrade. The rear housing provides access to the main harness, ACC connection and beam adjusters.
Make every connection count.
Match the supplied adapter to the original lamp connector. Follow the included guide for ACC, startup and sequential-function connections.
Finish with the correct beam aim.
Use the horizontal and vertical adjusters after fitting. This assembly is supplied without a leveling motor; original adaptive or auto-leveling functions must be checked before replacement.
Three independent function connections.
Sequential turn signalBrown function loop: connected = off; disconnected = on.
Optional blue effectPurple function loop: connected = on; disconnected = off.
Startup animationBlue function loop: connected = on; disconnected = off.
The diagram shows one supplied harness configuration. Follow the labels and instructions supplied with your specific set.
A planned installation makes the difference.
Professional installation is recommended. “Plug-and-play” describes the matching main connections; ACC setup, function selection and early-year trim still require attention.
- CHECK
Match the original lamp.
Confirm the year, WK2 body, original lamp type and connectors.
- FIT
Use the correct adapters.
Fit the lower trim pieces and adapters where required for 2014–2016.
- CONFIGURE
Set up the light behavior.
Use the supplied instructions for ACC and optional functions.
- FINISH
Test, secure and aim.
Check all functions, secure the harness and adjust both beams.
THE MATCHING SET
Two assemblies.
One cohesive upgrade.
Replace both sides together for a matching appearance and light signature.
- Left and right full LED headlight assemblies
- Supplied adapters and wiring
- Lower trim pieces for applicable 2014–2016 models
- Product instructions
The kit diagram identifies the accessories; the real photo shows the headlight pair and trim pieces. Check the supplied components against the packing list before starting.
START WITH THE RIGHT GRAND CHEROKEE
The year matters.
The body matters too.
Designed for the facelift 2014–2022 Jeep Grand Cherokee WK2, including the 2022 carryover Grand Cherokee WK.
2014 facelift–2016
Use the supplied early-year lower trim pieces and adapters where required.
2017–2022 WK2 / WK
Match the original lamp connector and supplied adapters. Halogen and HID / xenon applications are listed.
Not for 2011–2013, Grand Cherokee L or the newer WL body. For adaptive lighting, modified wiring or a non-US vehicle, confirm the configuration before ordering.
Product specifications
- Application
- 2014 facelift–2022 Grand Cherokee WK2 / carryover WK
- Supplied as
- Left and right headlight assemblies
- Headlight technology
- Full LED, high / low beam projector
- LED color temperature
- 6500–7000K, published specification
- Daytime / turn lights
- White DRL / amber turn signal
- Configurable functions
- Startup animation, blue startup and sequential indication
- Lens / protection
- Clear polycarbonate lens / IP67 rating
- Finish
- Black housing shown; side-marker appearance follows the selected option
- Original lamps
- Halogen and HID / xenon applications; match connectors and adapters
- Adjustment
- Manual horizontal / vertical adjustment; without leveling motor
BEFORE YOU UPGRADE
Good questions.
Clear answers.
The details that help you choose the right Jeep Grand Cherokee aftermarket headlights.
Is this a headlight bulb or a complete assembly?
This is a pair of complete Jeep Grand Cherokee LED headlight assemblies, with integrated high / low beam, DRL and turn functions. If you are looking for a Jeep Grand Cherokee headlight bulb only, this is a full-assembly replacement instead. No separate headlight bulbs are required.
Will these fit my 2014, 2015 or 2018 Grand Cherokee?
These model years fall within the facelift WK2 application. For 2014 and 2015 models, use the early-year lower trim pieces and adapters where required. For 2018 and other supported years, match the original connectors and lamp configuration before fitting.
What about a 2021 or 2022 Grand Cherokee?
Check the body generation. The listed application is for WK2 and the 2022 carryover Grand Cherokee WK. Grand Cherokee L and the newer WL use a different body and are outside this application.
Can I replace factory halogen or HID headlights?
Both halogen and HID / xenon applications are listed. Match the connector and supplied adapters to your original headlights. This assembly does not include a leveling motor; do not assume original adaptive or auto-leveling behavior will be retained.
Can I turn off the blue effect or startup animation?
Yes. The blue startup effect, startup animation and sequential indication have designated function connections. Follow the instructions supplied with your wiring version. White is the running-light color and amber is the turn-signal color.
Do the images show the same side-marker finish?
The main pair and bench photos show amber side markers. Some close-up function images show the clear side-marker version. The selected product option determines the finish supplied; confirm it in the shopping area before ordering.
What does IP67 mean for this headlight?
IP67 is the published water and dust ingress rating for the lamp assembly. Correct sealing and protected electrical connections remain essential. It does not imply better light penetration through rain or fog, or suitability for prolonged submersion.
Where can I check shipping, returns and warranty?
Use LED Factory Mart’s current delivery details, return policy and warranty terms for your order. For fitment help, provide your model year, original lamp type and a clear photo of the headlight connector.