DOT Approved 7 Inch Round LED Headlights for 1997-2018 Jeep Wrangler JK/ TJ / CJ / LJ

Overview

Upgrade your Jeep’s tired factory lighting with a pair of 7-inch LED headlights built for dark backroads, wooded trails, and unpredictable weather. A wide 4600-lumen low beam helps reveal shoulders and approaching turns, while the 7200-lumen high beam reaches farther down open roads and trails.

The crisp 6500K output and controlled Z-shaped cutoff put usable light where you need it—so you can spot ruts, rocks, and wildlife sooner without throwing uncontrolled glare at oncoming traffic. DOT-approved construction, included adapters, and built-in anti-flicker technology make this a practical upgrade for both daily driving and weekend wheeling.

Key Features

• See the Line Before You Commit: The 7200LM high beam reaches deeper into unlit roads and open trails, giving you more time to read the terrain before the next turn, drop, or obstacle.

• Wide, Controlled Low-Beam Coverage: A 4600LM low beam with a sharp Z-shaped cutoff lights the road, shoulder, and trail edges while helping keep glare out of oncoming drivers’eyes.

• Built for Mud, Rain, and Dust: The fully sealed IP67 housing keeps water and trail debris away from the electronics, so changing weather does not end the run.

• Ready for Rough Miles: A die-cast aluminum housing, scratch-resistant lens, and shock- and corrosion-resistant construction stand up to washboard roads, vibration, and exposed Jeep life.

• Cleaner Upgrade, Less Electrical Drama: Included H4-to-H13 adapters and built-in anti-flicker technology help prevent common flickering and CAN bus issues—without requiring a separate decoder on supported applications.

• Road-Ready Confidence: DOT-approved headlights combine trail-focused performance with a controlled beam pattern designed for on-road use.

Package Includes

• 1 Pair LED Headlights (Left & Right)

• 1 Pair H4 to H13 Adapters

Fitment

Fits factory-style 7-inch round headlight applications:

• Jeep Wrangler: 1997–2006 TJ, 2004–2006 LJ, and 2007–2018 JK/JKU

• Classic Jeep: 1944–1958 Willys; 1956–1966 FC150; 1959–1986 CJ; 1959–1983 DJ; 1959–1964 Utility; 1961–1969 Universal; 1963–1972 M151; 1963–1978 Wagoneer/J-Series; 1964–1969 Gladiator; 1966–1973 Commando; 1968–1973 Jeepster; 1974–1978 Cherokee; 1981–1985 Scrambler

• Other Applications:1992–2006 Hummer H1/AM General Hummer; 2003–2009 Hummer H2; 2014–2015 Willys Wheeler; Land Rover Defender 90/110; Mercedes-Benz G-Class

• H4-to-H13 adapters included for compatible applications.

Installation Guide

• 1. Typical Installation Time: About 20 Minute

• 2. Turn off the engine and disconnect the negative battery terminal.

• 3. Remove the grille or headlight retaining ring as required.

• 4. Unplug and remove the factory headlight.

• 5.Connect the included H4-to-H13 adapter when required.

• 6.Plug in the new LED headlight and test high and low beams.

• 7.Secure the headlight, reinstall the trim or grille, and reconnect the battery.

• 8.Park on level ground and adjust both beams so the cutoff is even and properly aimed.

Benefits

• Spot ruts, wildlife, trail markers, and roadside hazards sooner.

• Drive dark backroads with less eye strain and more confidence.

• Keep dependable lighting through rain, mud, dust, and rough terrain.

• Refresh your Jeep’s front end with a clean, modern LED look.

• Spend less time wiring and more time behind the wheel.