Cargo-floor liner
A removable protective layer between your gear and the original carpet. Keep everyday dirt and damp messes on an easier-to-clean surface.
TPE Jeep Cargo Liner & Seat Back Protector Set for 2018-2026 Wrangler JL 4-Door
SP-JK2304
Precio habitual
$175.65
Precio de oferta
$175.65
Precio habitual
$233.98
Precio unitario
por
No se pudo cargar la disponibilidad de retiro
Cargo Liner & Seat Back Protector
CoverageCargo, Seat Backs
& Divider Panels
& Divider Panels
MaterialFlexible TPE
Custom Fit3D Laser
Measured
Measured
SurfaceNon-Slip &
Easy-Clean
Easy-Clean
InstallationHook & Loop
+ Included Tape
+ Included Tape
Vehicle Fitment2018–2026 JL
4-Door Only
4-Door Only
Check fitment: Not for 2-door, JK, 4xe/PHEV, Rubicon 392 or 2026 Sahara. Factory-subwoofer models require trimming in the designated area.
Free ShippingEligible areas · orders over $79.99
30-Day ReturnsReturn shipping & restocking fees apply
Wrangler JL interior protection
More adventure.
Less cleanup.
Jeep Wrangler JL Cargo Liner & Rear Seat Back Protector Set, 2018–2026 4-Door
Fitted TPE protection for muddy gear, pet hair and everyday loading. Cover the cargo floor and the backs of your rear seats with one coordinated set.
2018–2026 JL Unlimited 4-doorNot for 2-door, JK, 4xe, Rubicon 392 or 2026 Sahara.
Floor + seat backsMore than a cargo mat
3D-measured fitShaped for the JL
Easy-clean TPELess time on cleanup
Factory accessPurpose-shaped openings
One coordinated set
Protection beyond the cargo floor.
Cover the surfaces your gear actually touches.
Rear seat-back covers
Help protect the cargo-facing backs of the rear seats from scuffs, pet hair and loading contact—not the passenger seating surfaces.
Divider panels
Separate panels complete the protection around the lower seat-back area, following the segmented layout of your JL.
Measured for your JL
Shaped around the space you use.
3D laser-measured contours follow the Wrangler JL cargo area. The fitted layout gives the floor, seat backs and divider panels a coordinated look.
Contoured panels
Flexible TPE follows the cargo-area layout.
Access stays within reach
Align the purpose-shaped openings with the original access points and tie-down locations.
Everyday protection, thoughtfully divided
A protective layer. A cleaner routine.
Help keep mud, hair and daily scuffs off the original surfaces.
See the coverage difference.
Original upholstery and the installed TPE set, shown in the existing product comparison.
Fold the seats. Keep the coverage.
Separate panels follow the rear-seat layout as you make room for longer loads. Image shows the seats upright and the lower divider panels.
Check panel alignment and fastening as the seats move. The set does not create a sealed floor or increase the vehicle’s load capacity.
Made for the everyday, too
For everything that comes along.
An easy-clean layer between your cargo and your Jeep’s interior—from the weekend trail bag to the weekly load.
Weekend gear
Load outdoor equipment without putting it directly on the original upholstery.
Everyday errands
Give luggage and everyday cargo a durable landing spot.
Pet hair cleanup
Remove loose hair and wipe down the TPE surface after the ride.
Secure pets and cargo separately. The liner is not a restraint or a cargo tie-down.
Flexible TPE
Tough on daily mess. Easy on cleanup.
A textured, flexible surface that makes everyday care straightforward.
Less scrubbing. More getting on with it.
Remove loose debris, wipe the surface or rinse removed panels, then let them dry before reinstalling.
Material that works with your routine.
Non-slip texture, flexibility and resistance to everyday wear and scratches—in an odorless TPE material.
Water-resistant surfaceWipe away damp dirt.
Non-slip textureAdded surface grip.
Wear + scratch resistanceMade for daily contact.
Flexible, recyclable TPECheck local recycling options.
Surface protection does not make the cabin watertight. Panels and seams do not seal the vehicle. Recycling depends on local facilities.
Simple panel installation
Fit it. Fasten it. Load up.
The covers use hook-and-loop fastening with the included double-sided tape. Check the supplied instructions and your vehicle layout before fitting.
- Position the panelsMatch the cargo floor, rear seat backs and divider sections.
- Align the openingsKeep factory access points clear and check each panel’s orientation.
- Secure and checkFasten the covers, then check alignment through rear-seat movement before loading.
The detail photo shows the hook-and-loop fastening. Subwoofer-equipped vehicles also require the trimming check below.
Check your cargo layout
Factory subwoofer? Check before you trim.
The set accommodates compatible layouts with or without a factory subwoofer. Subwoofer-equipped layouts require trimming along the designated area.
These images compare cargo layouts; they do not mark a cutting line. Confirm the designated trim area in the supplied instructions or with support before cutting.
2018–2026 Wrangler JL Unlimited4-door models, subject to the exclusions below.
Not compatible2-door, Wrangler JK, 4xe / plug-in hybrid, Rubicon 392 or 2026 Sahara.
Have a factory subwoofer?
Review the trimming note
The details, without the guesswork.
Specifications, care and compatibility—ready when you need them.
Product specifications
| Material | Flexible TPE |
|---|---|
| Coverage | Cargo floor + rear seat backs |
| Included | Cargo mat, rear seat-back covers, divider panels and double-sided tape |
| Design | 3D laser-measured, segmented panels |
| Fastening | Hook-and-loop + included double-sided tape |
| Vehicle | 2018–2026 Wrangler JL Unlimited 4-door, subject to listed exclusions |
| Factory subwoofer | Designated trimming required |
| Care | Wipe clean or rinse removed panels; dry before refitting |
Panel dimensions & sizing
Original product sizing diagram. Confirm vehicle compatibility before ordering; the diagram does not replace the fitment exclusions.
What is included in the set?
The set combines a cargo mat, rear seat-back covers and divider panels, with double-sided tape for installation. It protects the cargo-facing backs of the rear seats, not the passenger seating surfaces.
Can the rear seats still fold?
The segmented panels follow the rear-seat layout as the seats move. Align the openings and check the seating and fastening positions before loading. This set does not increase load capacity or create a sealed, seamless floor.
Does it work with a factory subwoofer?
Compatible factory-subwoofer layouts require trimming along the designated area. Confirm the correct cut line and your vehicle layout before cutting. The layout comparison photo is not a cutting template.
How do I clean the panels?
Remove loose dirt and pet hair, then wipe the TPE surface. If rinsing removed panels, dry them before reinstalling. Panels and seams do not seal the vehicle cabin.
Is this a pet restraint or cargo tie-down?
No. The liner protects interior surfaces. Secure pets and cargo separately with suitable restraints; the textured surface does not replace them.
What should I know about the TPE material?
The flexible TPE material is described as odorless and recyclable. Recycling options depend on local facilities and acceptance requirements. The set is for everyday surface protection, not a certified safety device.
Ready for the next load.
Cargo-floor and rear-seat-back protection, together.