Exceed Fabrication™ SR2 Overland bed rack for 2020-2026 Jeep Gladiator JT

The SR2 is a 3-in-1 adjustable Jeep Gladiator bed rack designed for daily hauling, overland travel, and campsite setups. Switch between Full Height, Extra Low, and Crossbar configurations to match different cargo, clearance, and adventure needs.

Its modular structure allows height adjustment in Full Height mode, while the width and length can be adjusted in every configuration. Three no-drill mounting methods—including clamp, T-slot, and Trail Rail installation—provide more flexibility for different Gladiator bed setups.

The SR2 has also been tested with select tonneau covers, including the Mopar Hard Tri-Fold and BAK X4s. With a rated capacity of up to 350 lb dynamic off-road, 600 lb dynamic on-road, and 1,100 lb static, it provides a capable platform for storage cases, recovery equipment, compatible rooftop tents, and other overland gear.

Product Name: SR2 Modular Jeep Gladiator Bed Rack

Configuration: Full Rack or Half Rack

Vehicle Fitment: Jeep Gladiator JT

Material: Heavy-Duty Steel

Design: Modular and Reconfigurable

Tonneau Cover Compatibility: Compatible with select tri-fold and soft roll-up tonneau covers

Mounting Options: Factory Trail Rail mount, bedside clamp mount, or JT-specific mounting brackets

Package Dimensions: 1355 × 460 × 215 mm

Net Weight: 147 lb

Gross Weight: 152 lb

Country of Origin: China

Full Rack with Factory Trail Rail Mount: 350 lb dynamic load capacity / 650 lb static load capacity

Full Rack with Bedside Clamp Mount: 300 lb dynamic load capacity / 650 lb static load capacity

Half Rack with Factory Trail Rail Mount: 450 lb dynamic load capacity / 750 lb static load capacity

Half Rack with Bedside Clamp Mount: 300 lb dynamic load capacity / 650 lb static load capacity

Recommended Uses: Rooftop tents, overland equipment, camping gear, recovery boards, storage cases, and general cargo

Load Rating Notice: All load ratings require weight to be evenly distributed. Do not exceed the vehicle manufacturer’s rated payload or truck-bed capacity.

Tonneau Cover Notice: Compatibility depends on the tonneau cover’s rail structure, opening method, and available mounting clearance.

Fits：
2020–2026 Jeep Gladiator JT

Designed specifically around the Gladiator’s bed dimensions and upright body lines, the SR2 provides a more integrated appearance than a generic universal truck bed rack.

Before Ordering
Please verify the following details before purchase:
Your Gladiator model year
Whether the truck has the factory Trail Rail system
Whether your tonneau-cover rails include accessible T-slots
The mounting clearance required by your tonneau cover
The total weight of your cargo, accessories, or rooftop tent
Tonneau-Cover Compatibility

The SR2 has been tested with:
Mopar Hard Tri-Fold Tonneau Cover
BAK X4s Tonneau Cover
Compatibility with other tonneau covers depends on the rail design, mounting position, and available clearance. Some installations may require additional sealing to improve water resistance.

SR2 Modular Bed Rack System
Adjustable Upper Crossbars
Upright Support Posts
Bed-Mounted Base Sections
Rack Assembly Hardware
Vehicle Mounting Hardware
Installation Instructions

What Jeep Gladiator models does the SR2 fit?
The SR2 is designed for 2020–2025 Jeep Gladiator JT models. Compatibility for later model years should be verified before ordering.

What are the three rack configurations?
The rack can be used in Full Height, Extra Low, and Crossbar configurations. The Extra Low setup removes the upright posts and installs the upper structure directly onto the base.

Is the SR2 bed rack adjustable?
Yes. Height is adjustable when the rack is configured in Full Height mode. The width and length can be adjusted in all three configurations.

Does installation require drilling?
No. The SR2 supports clamp, T-slot, and Trail Rail mounting methods without requiring permanent drilling into the truck bed.

Will it work with my tonneau cover?
The rack has been tested with the Mopar Hard Tri-Fold and BAK X4s tonneau covers. Other covers may also work, but compatibility depends on the cover’s rail design, opening method, and mounting clearance.

Will the tonneau cover remain waterproof?
Some tested installations may require additional sealing to improve water resistance. The rack itself should not be presented as guaranteeing that a tonneau-cover system will remain completely waterproof.

What is the load capacity?
The SR2 is rated for 350 lb dynamic off-road, 600 lb dynamic on-road, and 1,100 lb static when the load is evenly distributed. Do not exceed the vehicle manufacturer’s rated bed capacity.

Can I install a rooftop tent on the SR2?
The static rating can support many overland and rooftop-tent setups, but compatibility depends on the tent’s total weight, mounting span, mounting hardware, and manufacturer requirements. Confirm these specifications before installation.

Which mounting method should I choose?
Use clamp mounting for a compatible clamp-on bed setup, T-slot mounting when accessible T-slot rails are available, or Trail Rail mounting when the vehicle has the compatible Gladiator Trail Rail system.

Are all three mounting kits included?
The current product page does not specify whether all three mounting kits are included or whether one must be selected. This information should be confirmed before purchase and clearly displayed on the product page.

Can the rack be used without the upright posts?

Yes. Removing the upright posts allows the upper structure to be installed directly onto the base in the Extra Low configuration.

Is the SR2 a universal truck bed rack?

No. It is presented as a Jeep Gladiator-specific rack with vertical lines and specially formed rounded corners intended to complement the Gladiator’s body styling while maintaining structural welds.