How-Tos
Growing Plants with LED Grow Light
[blogslidersmall][content]A majority number of plants need a set of conditions that need to be met for their healthy growth, such as, sunlight, temperature, minerals, the amount of water and so on. Amongst these conditions, the most difficult to control is the light coming from the Sun, which is essential for plants, as the energy from sunlight is needed for the process of photosynthesis.[/content][/blogslidersmall]
How To Run Wires Through your Jeep Wrangler TJ Firewall
[blogslidersmall][content]Here you can see behind the engine under the intake manifold there is a cable coming through this grommet. This is the automatic transmission shifter cable. On a manual transmission equipped Wrangler you can remove the rubber plug and use this hole to pass wires through using the Daystar Firewall Boot.[/content][/blogslidersmall]
How To Bleed the Brake Master Cylinder
[blogslidersmall][content]When installing a new or refurbished master cylinder, it is critical that air is removed from the unit. This can easily be done by bench bleeding the master cylinder prior to installation.[/content][/blogslidersmall]
The Ins and Outs of LED Bias Lighting
[blogslidersmall][content]Bias lighting is backlighting behind a TV or computer screen and is used to reduce the strain on your eyes. If your eyes have ever felt tired after staring at a bright TV, computer, or cellphone screen, it’s because you have literally exhausted them..[/content][/blogslidersmall]
How to Safely Remove Ice And Snow From Your Jeep's Soft Top Windows
[blogslidersmall][content]If your Jeep rocks a soft top for the winter, and you do not have a garage, chances are you’ve walked out in the morning and found ice and snow clinging to your rear windows. Annoying, yes – but how you handle it will determine if that annoyance turns into a full-blown problem.[/content][/blogslidersmall]
Jeep Wrangler JK Diagnostic Codes and How To Check Them
Try as we may to keep our Jeep vehicles running perfect, odds are it will 'throw a code' at some point along the way. Here is our guide on how to deal with it when it happens.
How to Replace the Battery in your Jeep Wrangler Key Fob
[blogslidersmall][content]One of the questions we get a lot is what to do with a Jeep Wrangler key fob when it is just not responding. Before you take it to the dealership for a replacement, look at changing the battery. It's easy and cheap.[/content][/blogslidersmall]