Mary, ”As a proud owner of a 2022 Toyota Tundra, I’ve been customizing my truck step by step. One upgrade I recently added was a set of LED fog lights. These not only improve visibility during night driving and heavy rain, but also give the front end a much more aggressive look. Here’s my full experience of installing fog lights on my Tundra.”
Package Include:
Pair of fog lights
Set of wiring harnesses with control box
Tools Needed:
Trim Tool, 10mm Socket，10A Fuse
Step-by-Step Installation Guide：
driver's side as shown in the picture.
2. Place the fog lamp in the reserved position, aligning it with the clips.
3. Use a 10mm socket and a screwdriver to loosen the screws and clips of the fender liner.
4. Unplug the installation plug on the original vehicle's front bumper wiring harness.
5. Connect the corresponding lines as shown. 
6. Connect the red wire of the new fog lamp to the fuse, and then to the ACC.
7. The black wire of the new fog lamp is connected to the negative pole of the battery.
8. Close the hood and the installation is complete.
Why Upgrade to LED Fog Lights?
Better Visibility: LED fog lamps provide a brighter and wider beam.
Modern Look: With sequential turn signals and DRL (Daytime Running Light) features, the Tundra’s face looks sharper and more premium.
Durability: Most aftermarket fog lights are built with aluminum housing and IP67 waterproof rating, making them perfect for both daily driving and off-road use.
