Flush Mount LED Tail Lights Compatible Blind Spot Sensor for Jeep Gladiator JT

Name: Flush Mount LED Tail Lights Compatible Blind Spot Sensor for Jeep Gladiator JT
Brand: SUPAREE
SKU: SP-CL1487
Price: 399.0 USD
Availability: InStock
Rating: 5.0 (2 reviews)

SP-CL1487

$399.00

$399.00 ~~$562.95~~

Shipping calculated at checkout.

🎉 Spring Savings – Limited Time! 🌸
💡 Sitewide 12% OFF
👉 Use Code: SP12

Key Features:

Tail Lights Assembly: Upgrade your Jeep Gladiator JT with advanced LED taillight assembly, integrating turn signals, brake lights, reverse lights, and running lights into one sleek design. Featuring full LED technology, these lights are clear and uniform compared to traditional halogen lights, ensuring exceptional illumination for enhanced driving safety.
Flush Fit Design: Wraps tightly around the truck, ensuring illumination from any rear angle for better visibility and safety, Compared to the traditional, the flush mount design avoids damage while trail riding.
Start Up Animation: With start up animation lighting when you active your JT, it providing a striking visual.
Sequential Amber Turn Signals: The bright sequential turn signals respond instantly when you actived, with a response time of under 1 millisecond, can alert others quickly, improving safety on the road.
Easy to Install: Blind spot sensor compatible, straightforward installation, no need to modify.

Specification:

Operate Voltage: 12V
Power: Driving light: 3.2W; Brake light: 14.3W; Turn signal: 5.8W; Reversing light: 3.7W
Lens Color: Smoke
Waterproof Rate: IP68
Life Span: 50000H
Warranty: 2 Year

Fitment:

All Jeep Gladiator Version (Exclude 2025-2026 Jeep Gladiator)

Flush Mount LED Tail Lights Compatible Blind Spot Sensor for Jeep Gladiator JT

$399.00

2020 Jeep Gladiator Taillights

I have a 2020 Jeep Gladiator with Blind Spot sensors in the taillights. These lights are really nice and bright. Very easy to install. 1. To remove taillights remove two 8mm screws inside the tailgate. Pull light outward and the light will come out. 2 unplug from main wiring harness. 3. Remove blind spot sensors from old taillights by removing 6 screws and unplug the connector. Replace it in the new taillights same way as you took it out plug the connector into the sensor 4. Plug new taillight back into the main harness. You will see a resistor on each taillight and you will get a bracket for each resistor Mount the resistor to the bracket and mount out of the way.MUST BE GROUNDED. 5. Replace taillights the same way you removed them. Now everything will work like factory lights. In the kit you will get a wiring harness with a red and black wire on a gray plug. This is not used. It's for adding a resistor but your new lights already have one built in. These lights are amazing and make your Jeep look great. I rate them 5 star out of 5. You will be very satisfied with them.