Distinctive LED output
A clearly defined light pattern brings more visual presence to the original fender-light position.
Jeep Wrangler JL & Gladiator JT Fender Lights - Smoke DRL & Sequential Turn Signals
SP-CL1322-1
Regular price
$219.99
Sale price
$219.99
Regular price
$279.99
Unit price
per
Couldn't load pickup availability
Sequential Signals. White DRL.
Sequential Turn SignalAmber Flow
Daytime Running LightWhite DRL
Smoked Lens / HousingPC + ABS
Weather ProtectionIP67 Sealed
Plug & Play*5-Pin / 6-Pin
Factory Halogen VersionBuilt-in Decoder
Wrangler JL / JLU2018–2026
Gladiator JT*2020–2026
*Match your factory lighting and 5-pin / 6-pin connector. Choose Factory Halogen, Factory LED, or Sport / Willys / Willys Sport. Sport / Willys versions: Wrangler JL only, not Gladiator JT. Installation requires loosening the fender liners.
LED FACTORY MART / JL & JT FENDER LIGHTS
A cleaner look.
A signal in motion.
Sequential amber turn signals. Bright white daytime running lights. Smoked lenses that give your Jeep’s front end a more considered finish.
2018–2026 Wrangler JL / JLU
2020–2026 Gladiator JT
One visual design. Vehicle-specific fitment options.
- Sequential amber
- A flowing turn indication
- White DRL
- A distinct daytime signature
- Smoked lens
- A coordinated front-end look
- IP67
- Water & dust protection
A DETAIL THAT CHANGES THE FRONT END
Made to belong.
Built to stand out.
Refresh your Jeep without changing the character of its front end. The smoked lens follows the factory fender-light position, while the LED light pattern adds a sharper, more modern detail.
- A cleaner appearance.Dark lenses complement black trim and the lines of your fenders.
- A complete lighting upgrade.Replace the front turn-signal / DRL assemblies, not just the bulbs.
- Consistent from side to side.A left-and-right pair brings the same signature to both front corners.
TWO FUNCTIONS. ONE INTEGRATED ASSEMBLY.
White by day.
Amber when you turn.
Keep your daytime signature clean and make your next move unmistakable. White DRL and amber sequential indication share the same purpose-built fender-light assembly.
White daytime running light
An even light-guide appearance adds definition to the front of your Jeep.
Amber sequential turn signal
A directional LED sweep replaces a conventional all-at-once flash.
Select a state above. See the actual flowing sequence below.
SEQUENTIAL AMBER TURN SIGNALS
Don’t just flash.
Show the direction.
Amber LEDs illuminate progressively from the inside outward, creating a smooth sweep across the fender light. It is a purposeful change you see every time you signal.
- Flowing motion.A dynamic light pattern instead of a single static flash.
- Immediate LED response.Light activates as the turn-signal input is applied.
- A modern front-corner signature.Distinctive amber indication for your Wrangler JL or Gladiator JT.
BRIGHT WHITE DAYTIME RUNNING LIGHTS
A brighter detail.
All day long.
The integrated white DRL gives your front fenders a crisp, illuminated presence. Its light-guide design spreads the signature evenly, so the upgrade looks intentional rather than added on.
From an everyday commute to a weekend drive, it brings a consistent white light pattern to the front corners of your Jeep.
These are front fender turn-signal / DRL assemblies. They do not replace your headlights or their road-lighting function.
AN UPGRADE YOU USE ON EVERY DRIVE
More than a darker lens.
The appeal is in how the functions work together: a clean unlit appearance, a bright daytime signature and a moving amber signal when it matters.
Fast on. Fast off.
Responsive LEDs deliver crisp changes between illuminated and unlit states.
Designed for repeat use
Long-life LED technology supports the regular demands of daytime running and turn indication.
WEATHER PROTECTION, BUILT IN
Ready for the forecast.
And the road beyond it.
Rain on the road and dust on the trail are part of Jeep ownership. The IP67-rated assembly combines a protective lens with a durable housing to help keep the lighting components protected.
- IP67-rated sealing.Protection against dust and water ingress at the lamp assembly.
- Black ABS housing.A durable shell for everyday use and outdoor exposure.
- Polycarbonate lens.A clear optical cover designed to resist impacts and road debris.
Secure the connectors and seals during installation. Avoid prolonged submersion and direct high-pressure washing.
THE DETAILS BEHIND THE FINISH
Clean on the outside.
Considered underneath.
A smoked front lens, protective rear housing and vehicle-specific mounting arrangement make this a complete replacement assembly—not a stick-on lighting strip.
Inspect the lens, back of the lamp and connector before fitting. Matching the original configuration is the key to a clean installation and reliable function.
FACTORY-STYLE CONNECTIONS
A cleaner install.
Without cutting wires.
Choose the version that matches your original fender lights, then connect using the compatible vehicle-style plugs. The matched version is designed to replace the original assembly without cutting the factory wiring or drilling new mounting holes.
- Check the actual connector.5-pin and 6-pin configurations are listed. Compare your vehicle’s plug before ordering.
- Support for factory-halogen vehicles.The halogen version includes a decoder to help prevent hyper-flash and related warnings.
- Test before closing the liner.Confirm white DRL and amber turn functions on both sides, then secure the wiring.
Plug-and-play describes the electrical connection. Accessing the factory mounting points still requires loosening the fender liner.
SAME LOOK. THE RIGHT FIT FOR YOUR JEEP.
Choose by fitment.
Not by appearance.
All three options share the same visual design. The difference is the vehicle and original-light configuration they are made to fit—not the look of the lights.
FITMENT OPTION
Factory halogen
2018–2026 Wrangler JL / JLU · 2020–2026 Gladiator JT
Choose for the original halogen front fender-light configuration. Match the actual vehicle connector before ordering.
The halogen version includes a decoder to help manage hyper-flash. A matching connector and correct installation are still essential.
This comparison explains fitment only. Select the matching option in the store’s purchase form.
Check the vehicle
Confirm the model year and platform: Wrangler JL / JLU or Gladiator JT. A 2018 Wrangler must be JL, not JK.
Check the original lights
Use the factory front fender-light configuration. An aftermarket headlight swap does not identify your fender-light version.
Compare the plug
Check the actual connector and mounting arrangement. If unsure, send support photos before placing the order.
Important: The Sport / Willys / Willys Sport option is for Wrangler JL / JLU only—not Gladiator JT.
WATCH BEFORE YOU FIT
See the upgrade.
Understand the installation.
Watch the existing JL / JT fender-light demonstration and installation video, then check your own vehicle’s connector and mounting access.
Confirm the version
Match the vehicle, factory lamp and connector before removing the original assemblies.
Access the mounts
Loosen the front fender liner to reach the rear of the lamp and its fixing points.
Fit and connect
Install the matched replacement assembly and connect the appropriate vehicle-style plug.
Test both functions
Check white DRL and sequential amber turn signals on both sides, then refit the liner.
Access and installation time vary with the vehicle, modifications and experience. Follow the supplied instructions; the video does not replace a fitment check.
A COORDINATED PAIR
Both front corners.
One consistent upgrade.
The kit supplies a matched pair of front fender turn-signal / DRL lamps for the selected vehicle configuration.
- Left + rightFront fender light assemblies
- Two functionsAmber sequential turn + white DRL
- InstructionsProduct installation guidance
Connector and fitting components depend on the selected version. Other lights and vehicle accessories shown in the images are not included.
FITMENT CHECKPOINT
Built around your Jeep.
Selected around its setup.
2018–2026
Wrangler JL / JLU
Choose the correct factory-halogen, factory-LED or dedicated Sport / Willys / Willys Sport option.
2020–2026
Gladiator JT
Check the factory-halogen or factory-LED option. The dedicated Sport / Willys option is not for JT.
Not a universal lamp or a JK / TJ replacement. Aftermarket fenders, fender chops or modified wiring require a separate compatibility check.
Ask a fitment questionTechnical specifications
- Product type
- Front fender turn-signal / DRL assemblies
- Quantity
- One pair: left and right
- Turn indication
- Amber, sequential inside-to-outside flow
- Daytime running light
- White LED
- Lens / housing finish
- Smoked lens / black housing
- Construction
- ABS housing / polycarbonate lens
- Operating voltage
- DC 12V
- Ingress protection
- IP67-rated assembly
- Connection
- Vehicle-specific plug; verify 5-pin / 6-pin configuration
- Electrical support
- Built-in decoder on the factory-halogen version
- Fitment options
- Factory halogen / factory LED / JL-only Sport & Willys
- Product warranty
- 2 years, subject to store terms
CLEAR ANSWERS BEFORE YOU ORDER
Know the details.
Choose with confidence.
Do the fitment options look different?
No. The options share the same visual design. Select by your Jeep’s model, original fender-light configuration and connector—not by appearance.
Which option is for Sport or Willys?
The dedicated Sport / Willys / Willys Sport option is listed for 2018–2026 Wrangler JL / JLU only. It is not for Gladiator JT. Confirm the actual original fender-light arrangement before ordering.
Is the amber signal sequential or a normal flash?
The amber LEDs illuminate in sequence from the inside toward the outside of the light. The page’s animated demonstration shows the flowing effect; the lighting-state selector shows close-up white and amber appearances.
Does the kit include white DRL?
Yes. Each assembly integrates a white daytime running light as well as amber sequential turn indication. Confirm both functions after connecting the matched version.
How do I know whether I need a 5-pin or 6-pin connection?
Inspect and photograph the connector on your original front fender light. Match the actual plug and factory-light configuration; do not infer pin count from year or trim alone. Send photos to support if unsure.
Is installation plug-and-play?
The correctly matched version uses vehicle-style connectors without cutting factory wires or drilling new mounts. You still need to loosen the fender liner to access the back of the lamp. Follow the supplied instructions and secure the wiring before refitting the liner.
Will the lights cause hyper-flash?
The factory-halogen version includes a decoder intended to help prevent hyper-flash and related errors. The correct version and proper connections are essential. If a problem remains, check the setup with support rather than assuming every vehicle needs the same extra component.
Can these replace a bulb or fit aftermarket fenders?
These are complete front fender-light assemblies, not individual bulbs. They are intended for the listed vehicle configurations. Aftermarket fenders, chopped fenders or modified wiring need a separate fitment check.
Are the lamps ready for wet weather?
The assembly is rated IP67 and uses an ABS housing with a polycarbonate lens. Protect the connectors and seals during installation, avoid prolonged submersion and do not direct high-pressure water at the lamp or connections.
What is included and what support is available?
One left-and-right pair of front turn-signal / DRL assemblies and product instructions. Fitting connections depend on the chosen version. The product page lists a 2-year warranty; shipping and returns follow the store’s current policies.